RTR Riser to Riser Adapter
- Fits on the ‘lip’ of corrugated pipe
- Line the inside of the bottom with butyl sealant (5/16”) then set on top securely
This can be used when encountering a competitor’s riser that you want to convert and start to use Tuf-Tite risers/lids for. It may also be used on Corrugated pipe (if the rim is not flat). If you find a damaged lip on a Tuf-Tite riser, you can use this to install another riser on top or a new lid. You may mount a riser, riser safety pan or lid on top.
RTT Riser to Tank Adapter
- Fits on the ‘shelf’ of corrugated pipe
- Line the bottom of adapter with butyl sealant then screw on
This can be mounted on any flat surface (plastic, plexiglass tanks or concrete risers). It may also be used on corrugated pipe where the rim is flat. Mount with butyl and screw down. It can be used in place of a TAR when the opening is completely inside the inside diameter of the RTT adapter. You may mount a riser, riser safety pan or lid on top.
TAR (Tank Apapter Ring)
This is mounted on top of the tank with butyl sealant and concrete screws. You may mount a riser, riser safety pan or lid on top.